Luma Surveillance LUM-500-DVR-16CH, Technical Reference Manual

Page: 160 / 217

Luma Recorders
|
Local Interface
Jump to Main TOC 160 Jump to Local Interface
Record
This sets up specific activity on the camera based on the time of day.
Schedule
DVR models have only a Record tab. NVR models have both record
and Capture (for snapshots). Both tabs are structured identically.
At the top, select the camera you wish to edit, then ensure that
Enable Schedule is selected. If scheduling is not enabled, you will
only be able to record manually.
To modify the schedule, click Edit .
Click Back to return to the settings menu, or Live View to return to
the live page.
At the bottom, click Apply to save the changes you have made.
Copy duplicates the current camera’s settings to other cameras.
Edit Window
Choose the weekday (or pick holiday , if holidays are enabled) to
schedule with the dropdown at the top of the window.
You can schedule to use an activity all day by clicking the All Day
checkbox and choosing the activity to the right.
Alternatively, you can set the camera’s activity hour-by-hour, even
minute-by-minute. To adjust the schedule, deselect
All Day , then
click any of the time segments and enter new start and stop times
(shown in 24-hour format). You can define up to eight separate
time spans. During time spans not covered, no automatic camera
recording takes place.
At the bottom of the window, click Apply to save the changes you
have made.
Click Copy to copy the schedule to other days of the week
(numbered 1–7, with Monday numbered 1).
Parameters
This window defines the settings for your recordings.
At the bottom, click Restore (DVR only) to reset your the settings in
this window to their factory defaults.