Luma Surveillance LUM-500-DVR-16CH, Technical Reference Manual

Page: 143 / 217

Luma Recorders
|
Web Interface
Jump to Main TOC 143 Jump to Web Interface
VCA
This option is only available on NVR models.
VCA allows your NVR to record smart motion events set up within
your IP camera.
At the top, select the camera (channel number) and check Enable to
allow your system to use VCA, as well as to set up the schedule.
The main section of the window is divided into two tabs: Arming
Schedule, and Linkage Method.
Be sure to click Save before leaving this screen.
Arming Schedule
You set up this option for each camera independently. Generally
speaking, there is no reason not to have VCA enabled 24/7.
The main portion of the window shows the schedule for the selected
camera. Each box covers one hour of time (with a dotted line at the
half-hour mark), and is color-coded to show the camera’s scheduled
activity. Blue indicates VCA is active; white means the camera is not
enabled during that time.
To adjust the schedule, press Edit at the top right. If you need help,
see “Arming Schedule Tool” on page 95.
Linkage Method
This tab helps you set up the camera to take action when a smart
event occurs, like activating a siren, locking a door, or alerting key
personnel. Despite its appearance, this is not a table; it’s just an
arrangement of columns.
For help on linkages, see “Linkage Control” on page 98.