Luma Surveillance LUM-500-DVR-16CH, Technical Reference Manual

Page: 131 / 217

Luma Recorders
|
Web Interface
Jump to Main TOC 131 Jump to Web Interface
RS-232 Serial Port
This command is not available on 4-channel DVR models.
This helps you interface with older systems that control devices
using the RS-232 protocol (e.g., manned surveillance stations) to set
up PTZ control through the recorder.
Check with your system documentation for information on the
proper settings for baud, data bit, stop bit, parity, and flow control.
Usage determines what state the system is in. For development
and debug purposes, set this to transparent channel. For all other
purposes, set it to console.
Click Save before exiting this screen.