Luma Recorders
|
Web Interface
Privacy Mask
At times, there may be areas under surveillance that you want to
exclude from visibility (e.g., a security keypad), or be required
to block by law (e.g., a neighbor’s window). These areas can be
protected by a privacy mask. At the top, you must check
Enable
Privacy Mask
to use this feature.
For legal reasons, the recording data covered by a privacy mask is
lost forever. There is no way to recover it.
You can designate up to four areas on each camera for a privacy
mask. To create an area, click
Draw Area
, then click-and-drag your
mouse across the live feed. A gray box appears. You can select a box
you have drawn by clicking on it. You can resize a selected box by
clicking and dragging on one of the red dots around its perimeter,
or move it around the screen by clicking and dragging on its gray
center.
Click
Clear All
to remove all privacy masks.
Be sure to click the
Save
button before leaving this screen.
Summary of Contents for LUM-500-DVR-16CH
