EN
Manual XC250
13
For maintenance or repair work which requires the
housing to be opened, contact Lufft
®
customer
service. Devices which have been opened
unlawfully are void of any warranty and warranty
claims.
Cleaning the device
1. Use a soft, lint-free cloth for cleaning.
2. Dampen the cloth with clean water. Do not use sprays,
solvents, alcohol-based or abrasive cleaners to dampen the
cloth.
3. Clear dirt from the housing, the connections and the colour
display.
Cleaning the infrared sensor
• If the infrared sensor is dirty, you can carefully blow it off.
Battery change
Change the batteries when the message
Batt lo
is displayed upon
switch-on or the device can no longer be switched on. See
Inserting the batteries on page 5.
In the European Union, electronic equipment must not
be treated as domestic waste, but must be disposed of
professionally in accordance with Directive
2002/96/EC of the European Parliament and Council of
27th January 2003 concerning old electrical and electronic
equipment. After the end of its use, please dispose of this device
in a manner appropriate to the relevant legal requirements.
In the European Union, batteries must not be treated as domestic
waste, but must be disposed of professionally in accordance with
Directive 2006/66/EC of the European Parliament and Council of
6th September 2006 concerning batteries and accumulators.
Please dispose of batteries in a manner appropriate to the
relevant legal requirements.
in accordance with the EC Low Voltage Directive 2006/95/EC and
the EC Directive 2004/108/EC about electromagnetic
compatibility.
We hereby declare that the Infrared thermohygrometer XC250
was designed, developed and produced in compliance with the
named EC Directive.
Applied harmonised standards:
The
marking is found on the rear of the device.
Manufacturer:
G. Lufft Mess- und Regeltechnik GmbH
Gutenbergstr. 20
D-70736 Fellbach
Phone:
+49 711 518 22 0
Fax:
+49 711 518 22 41
Email:
Fellbach, 31/03/2014
Managing Director: Axel Schmitz-Hübsch
Maintenance
Disposal
Declaration of conformity