Lufft CHM 15k Nimbus, Manual

Page: 32 / 101

Communication RS485 & Ethernet
32 Revision R09, November 2016
Parameter name
short
cmd
standard
value
range / short description
AFDmode* AFD 0 0; 1, switch on, ftp data transfer
Altitude(m) ALT 0 0 – 9999, unit is always meter!
ApdControlMode* ACM 3
0 – 3, APD modes, only change if you
know how to do
Azimuth AZT 0
0-360 degree x 100
(handled as integer)
Baud BAU 3 2 – 7 (4.800 – 115.200 Baud)
BaudAfterError* BAE 3 2 – 7 (4.800 – 115.200 Baud)
BlowerMode BLM 0 0 – 4
CHMTest CHT 0 0; 1
DateTime DD.MM.YYYY;hh:mm:ss (8.1.6)
DeviceType DVT CHM15k unit type, eg. {CHMxk, PLC,...}
DhcpMode DHM 1 0; 1: switches on/ off DHCP mode
dt(s) DTS 15 logging & reporting time: 5 – 600 s
DeviceName
(old: FabName „SRN)*
DVN CHMyyxxxx
CHM + serial
№
of the CHM instrument
Gateway GAT 0.0.0.0 set/ query static gateway address
IgnoreChars* ICH 06 8Bit-ASCII-Codes
Institution INS NN Any character (text) string
IPaddress IPS 0.0.0.0 set/ query the static IP address
LATitude LAT
52.40050³
5240050² -90 to +90 degree decimal value
(+ degrees north)
Layer NOL 3 1 - 9, (JO-DataClient limited to 5)
LaserMode* LSM 1 0; 1 switch on/ off Laser
Location LOC NN
alphanumerical character string (max.
31 characters)
Longitude LON
13.239050³
13239050² -180 to +180 degree decimal value (+
degrees-east)
MaxCrosstalkChars* MCC 5 0 – 1024
Netmask NMA 0.0.0.0 set/ query static netmask address
NtpMode NTM 1 0; 1 switch on / off ntpd
NtpServer NTS 0.0.0.0 set/ query NTP time server address
PelTierMode* PTM 1
0; 1 switch on/ off detector peltier
mode
PowerSaveMode PSM 0
0; 1
(cannot be set in actual firmware)
RangeResolution RAR 3
Number of 5m range intervals inte-
grated for the NetCDF range vector
RangeStart RAS 15 first range value in the NetCDF file
RangeEnd RAE 15345 last range value in the NetCDF file
RangeHRDim RHD 32
No of data points in the high resolu-
tion range vector
Table 4: list of configurable device parameter; *can be set in service mode;
²in the web interface only, ³by terminal program (RS485).