Manual
LCom
Page 80 of 158
5.9.1 MSSI Configuration
The following parameters can be set for MSSI protocol:
•
Soap Reset Timeout:
if no Soap/MSSI Request is received within the
configured time interval, the Soap/MSSI protocol stack is reset. This is to
handle a known problem that the MSSI protocol stack may “hang” sometimes
(under unknown circumstances).
•
Check MSSI activity:
if this option is selected, the MSSI requests are
monitored, and if the configured time intervals for Modem Reset Timeout or
LCom Reboot Timeout is expired without MSSI activity, the appropriate action
is taken.
o
Modem Reset Timeout:
if there was no MSSI activity/request for the
configured time interval (in seconds), the GPRS or Analog modem is
reset (if either is configured/active). A timeout value of 0 will disable the
modem reset.
o
LCom Reboot Timeout:
if there was no MSSI activity/request for the
configured time interval (in seconds), the LCom will be rebooted. A
timeout value of 0 will disable rebooting.
