5.8.3 NTCIP SNMP OIDs
5.8.3.1 iso.org.dod.internet.mgmt
The standard “Mib II” and “Hostmib” OIDs (provided through the Windows CE SNMP framework) are supported, including the OIDs as
required by NTCIP 2104:2003 / RFC 1213.mib.
5.8.3.2 iso.org.dod.internet.private.enterprises.nema.nemaPrivate
All manufacturer specific sensor/measure values are reported under this subtree under node 50 (which has been assigned by Nema to
informatikWerkstatt). Following lists all objects (OIDs) as defined in the respective MIB file (IW-NEMAPRIVATE-MIB.mib)
•
OIDs which represent measurements are shown in
bold
.
•
OIDs which represent configuration elements are shown in
gray
.
The “Source Sensor Assignment” column shows which sensor/measurement type should be assigned to this OID (in which
format/unit), and where appropriate which conversion/scaling should be configured in the LCom sensor configuration, before the
measurement is processed in the NTCIP section of the LCom. A scaling is stored in the NTCIP sensor configuration for each OID
(independent of any possible scaling/value mapping in the LCom sensor configuration), which usually converts the unit delivered by
the UMB sensor channel (e.g. km/h) to the encoding required by the NTCIP standard (e.g. 1/10km/h).
5.8.3.2.1 sensorData.roadSensors subtree
