Manual
LCom
Page 114 of 158
If the model calculation is active, “virtual” output sensor channels for the simulated
saline concentration and freeze temperature are created automatically for every
configured instance.
5.13.7 Fresh Snow Height
Here the parameters for the fresh snow height model calculation are configured. The
model calculates 2 values that are represented by 2 (virtual) sensor channels: fresh
snow amount for measurement interval (i.e. every minute), and fresh snow amount
since daybreak.
•
Model active:
the model calculation is active/inactive
•
Min Snow Density:
minimum density of snow pack (kg/mm*m²)
•
Max Fresh Snow Density:
maximum density of fresh snow (kg/mm*m²)
•
Min Temp for Max Snow Density:
minimum temperature for maximum snow
density (°K)
•
Snow Factor Precipitation:
multiplication factor for precipitation
•
Precipitation Type:
precipitation type sensor
