4.13. PAGE 8 - UNIT 2
61
• Rightmost Digit (0-9)
• Middle Digit (0-9)
• Leftmost Digit (0-9)
• Multiplier with all digits flashing (adjustable from x.xx
µ
to xxx M depending on unit
selected)
Use the UNIT button to select the appropriate parameter, and use the MODE and ON/AUD
buttons to scroll through the parameter options.
Unit 1 - DOSE Alarm 3 -
Upon entry into Unit 1 Dose Alarm 3, one of the following parame-
ters will be selected (flashing).
• Rightmost Digit (0-9)
• Middle Digit (0-9)
• Leftmost Digit (0-9)
• Multiplier with all digits flashing (adjustable from x.xx
µ
to xxx M depending on unit
selected)
Use the UNIT button to select the appropriate parameter, and use the MODE and ON/AUD
buttons to scroll through the parameter options.
Unit 1 - Channel -
Upon entry into Unit 1 Channel, the parameter will be selected (flashing)
indicating the state of the parameter. Valid parameter options are as follows:
• 1 (Channel 1)
• 2 (Channel 2)
• 1i (Internal Detector Only)
Use the MODE and ON/AUD buttons to scroll through the parameter options.
4.13 Page 8 - Unit 2
To begin adjusting a unit parameter, short press the MODE or ON/AUD to scroll through the
available unit parameters. When the appropriate parameter is selected, short press DETEC-
TOR to select the detector that needs the parameter adjusted. To begin, short press UNIT
to begin modifying the parameter chosen. Finally, extra-long pressing the UNIT button will
complete the modification.
March 2021
