Installing the WaveAC C ESS NET System 2-37
Basic Software Configuration
It is mandatory to define the ESS-ID of the remote unit,
before commencing use. This procedure is described
below.
Certain other basic parameters may be configured in
order to change the default values in the remote unit, if
necessary. These parameters can be configured using
either the system monitor or a Bootp server with TFTP
capabilities. Refer to the
WaveACCESS NET User's
Guide for detailed instructions on configuration options.
To define the ESS-ID:
1.
Using the system monitor, access the Main menu,
press 1. The Configuration menu is displayed.
2.
In the Configuration menu, press 1. The Host ID
Configuration screen is displayed.
3.
Press 8 and type in the ESS-ID.
4.
Press S to save your work in flash memory.
5.
Repeat this procedure for each BR132, giving each
one the same ESS-ID.
This
completes the quick installation procedures for the
WaveACCESS NET remote units.
