Installing the WaveAC C ESS LINK System 1-25
Installation Procedure
The WaveACCESS LINK SM1024 is placed indoors, as
near as possible to the antenna. Installation of the
SM1024 requires the following steps:
✦
Step 1: Connecting the Antennas to the SM1024,
below.
✦
Step 2: Connecting to the Synchronous Network,
page 1-26.
✦
Step 3: Connecting to the Ethernet Network
(Optional), page 1-26.
✦
Step 4: Powering Up the SM1024, page 1-27.
Step 1: Connecting the Antennas to the
SM1024
The first step is to connect the antennas to the
WaveACCESS LINK SM1024.
To connect the antennas to the WaveACCESS LINK
SM1024:
Follow the same procedure as for the WaveACCESS
LINK BR132, as described in Step 1: Connecting the
Antennas to the BR132, on page 1-19.
WARNING: Due to FCC rules, the antenna connectors are
non-standard. Take care that they are not damaged, because
they cannot be replaced. Use only the supplied tension
release cable. Other connectors will not fit properly and may
cause harmful interference.
