1-24 Quick Installation Guide
Installing the WaveACCESS
LINK SM1024
This section provides the following information for
quick installation of the WaveACCESS LINK SM1024,
using the default settings.
✦
Packing List, below.
✦
Installation Procedure, page 1-25.
✦
Basic Software Configuration, page 1-30.
Packing List
The WaveACCESS LINK SM1024 arrives in a single
package that includes the following items:
✦
Two WaveACCESS LINK SM1024 wireless synchronous
modems, configured as a master/slave pair.
✦
One power adapter complete with a 5' (1.5m) cord.
✦
Optional adapter cable for X.21 and V.35
connection.
✦
Software diskette.
✦
This
Quick Installation Guide.
✦
CD-ROM containing documentation.
✦
Two optional omnidirectional dipole antennas for
indoor use (if ordered).
You also should have received a second package that
includes the WaveACCESS LINK antenna and cable kit
you ordered with the system. This kit typically includes
the antenna, antenna cable(s), tension release cable,
female-to-female N-type adapter (if necessary), external
filter (for certain specific antennas in Europe or ETSI
compliant countries), RF cable clamps and a lightning
arrestor (if ordered).
Note: If any of these items are incomplete or missing, you might not
be able to install the WaveACCESS LINK SM1024. In such cases,
contact your nearest Technical Support Center. Refer to
Chapter 3,
Technical Support
, for information.
