Lucent MAX 3000 Series, Administration Manual, Page: 282 / 296

Machine Interface Format (MIF)
LOOP
MAX Administration Guide C-25
.Ans 2#=
phone number
.Ans 3#=
phone number
.Ans 4#=
phone number
Note:
• s00.LMODEM...
s = any slot in which a LAN modem (digital modem) module is installed.
LOOP
spp .LOOP.0.Local LB=Yes,No
.DSR=Active,Inactive
(read)
Toggle
(write)
.RI=Active,Inactive
(read)
Toggle
(write)
.CD=Active,Inactive
(read)
Toggle
(write)
.DLO=Active,Inactive
(read)
Toggle
(write)
.PND=Active,Inactive (read) Toggle (write)
.ACR=Active,Inactive
(read)
Toggle
(write)
.Inc Ch Count=Yes
(write only)
.Dec Ch Count=Yes
(write only)
.Rate=64K,56K (read) Toggle (write)
Note:
• spp.LOOP...
s = 1 or any slot in which a serial host expansion module is installed.
pp = 01 through last serial host port.
• Active/Inactive and 64K/56K are <value>s only for read commands such as GET.
• Toggle is a <value> only for write commands such as SET.
•
SET spp .LOOP.0.Local LB=Yes
must be commanded before any other LOOP
commands, such as RI, CD, etc.
• The <value> Toggle in a SET command changes the state of the addressed entity from it
current state to another state, i.e., from Active to Inactive or from Inactive to Active.
For example:
: SET 202.LOOP.0.DSR=Toggle
+ ERROR
: SET 202.LOOP.0.Local LB=Yes
: SET 202.LOOP.0.DSR=Toggle
:
PORT
spp
.PORT.0.Port Name=
text
.Ans 1#=
phone number
.Ans 2#=
phone number
.Ans 3#=
phone number
.Ans 4#=
phone number