Chapter 4 Configuring the STM-1 Mode Ports and Channels Using the Console
Obtaining General Module Data and Accessing Ports and Channels
4-6
255-700-714R11.0
PacketStar
®
PSAX 1-Port Channelized OC-3/STM-1 CES Module User Guide
, Issue 1
Release 11.0.0
Obtaining General Module Data and Accessing Ports and
Channels
This section describes how to obtain product, model, version, and serial num-
ber data about a module from the Equipment Configuration window. In
addition, the window provides operational status and alarm conditions on
each installed module. You also use this window to access the port and chan-
nel configuration windows for the PSAX modules.
Begin
Accessing the Equipment Configuration Window
1
On the Console Interface Main Menu window (see Figure 4-5), select the
Equipment Configuration option.
The Equipment Configuration window is displayed (see Figure 4-5
through Figure 4-7). Table 4-1 describes the commands on the windows;
Table 4-2 describes the fields on the windows. The alarm status descrip-
tions for the Alarm Status field on the Equipment Configuration window
are provided in Table 4-3.
2
View the operational and alarm status, software version, PEC, and serial
number data of the installed modules.
3
When you are ready to begin configuring the ports and channels of the
module, select the line displaying the name of the module you want to
configure.
4
Proceed to the section entitled, “Configuring All Channels on a Port
(Channelization Disabled)” on page 4-10.
End
Figure 4-5. Console Interface Main Menu (Equipment Configuration Selected)