255-700-714R11.0
4-53
PacketStar
®
PSAX 1-Port Channelized OC-3/STM-1 CES Module User Guide
, Issue 1
Release 11.0.0
Chapter 4 Configuring the STM-1 Mode Ports and Channels Using the Console
Saving the Equipment Configuration and Logging Off
Saving the Equipment Configuration and Logging Off
After configuring the module ports and channels, the interface types for each
port and channel, and the connections, you must save the values to the
PSAX system database. It is recommended that you save your values fre-
quently as you progress through your work, at a minimum, after finishing
each stage of work:
•
Configuring each module in your system
•
Configuring the connections in your system
•
Before exiting your current console session
Perform the following procedure to permanently save the values for your
system.
!
CAUTION:
If your system loses power or if you reboot the chassis, and you have not
yet saved the values permanently, you will lose all unsaved values you
have applied on the various windows.
Begin
1
Press Ctrl+G, to return to the Console Interface Main Menu window.
On the Console Interface Main Menu window,
[Modified]
is displayed
next to the
Save Configuration
command, indicating you have made
changes to the system that are not yet saved to the PSAX system database
(see Figure 4-22).
[J2 Trace]
(display only)
Default:
Mismatch
Range: N/A
Format: AlphaNumeric
Indicates whether the near-end message received
matches with the near-end expected message which
is configured for the same port. If the message
matches then it displays as match, if it does not
match then it displays as mismatch.
Mismatch
Indicates the near-end message received mismatches
with the near-end expected message.
Match
Indicates the near-end message received matches
with the near-end expected message.
Table 4-23. Lower Order Path Trace - J2 Byte Configuration Window Field Descriptions
Field Name
Field Value
Description