Lucent Technologies WaveStar OLS 40G, Installation Manual

Page: 82 / 578

3-6
Issue 1.0 March 2001
365-575-389
Installation Manual
Equipment Installation
Materials and Tools
Equipment Verify the WaveStar OLS 40G equipment bays or cabinets shipped to the location
match the customer order.
Mounting
Materials Verify the specified mounting materials and bay frame accessories are available
as below:
■
Hold-down plates and washers
■
Anchors for concrete floors
■
Mounting studs or bolts and nuts
■
Mounting shims
Installation Tools The installer is expected to have access to small hand tools normally used for
assembling equipment frame hardware (see Section 1, Overall Installation and
Test Considerations). Other suggested tools are listed in the table below:
Quantity Description
1 Vacuum for cleaning up drilling debris
1 Drilling hammer for 5/8” drill (for use with concrete floors)
1 #54720 C-Tap connector Thomas & Betts™ or
equivalent
1 TBM5 or TBM5S Crimping tool Thomas & Betts or
equivalent
1 Brown or Pink Die Code Crimping Die Thomas & Betts or
equivalent
1 Torque Wrench with minimum 25 ft.-lb. capacity
1 Anchor Setting Tool for Drop-In Anchors (comcode
406902049)
1 Anchor Setting Tool for Heavy-Duty Anchors (comcode
406899831)
1 Safety Goggles