The Frequency Select Utility
Running the Frequency Select Utility
6-4
WaveLAN/ISA Card User’s Guide
Press
[Enter]
to program this operating frequency into
your card. The WaveLAN card will use the new
frequency until the Frequency Select Utility is run again.
Press the
[F10]
key to quit the utility.
Command line
parameter
6
You can use the parameter option
-M
on the MS-DOS
command line to select a "Monochrome Display" mode.
Try this parameter if you have difficulty viewing the
display in normal colour mode.
Example:
wfreqsel -m
isa-src.bk : isa-ch6.frm Page 4 Monday, October 14, 1996 1:23 PM