Installing the WaveLAN Card
Installing the Card in your Computer
WaveLAN/ISA Card User’s Guide
2-5
Figure 2-2
2
Inserting the card in your computer
7
Secure the card in its slot
Replace and tighten the card retaining screw.
8
Replace the cover and re-attach the cables.
After you insert the Network Interface Card, replace
the PC's cover. Move your PC to its intended
location, and re-attach the power cord and other
cables that you disconnected earlier.
Connecting the Antenna
2
To connect the antenna, simply push the cable end
connector on to the connector situated in the middle of
the card's end bracket until it clicks into place.
Antenna Placement
2
The antenna performs best in an open environment with as few
obstructions as possible. Signal strength can be significantly
affected by closeness to metal surfaces and, to a lesser extent,
by concrete walls, thick masonry walls and solid high-density
materials. To ensure the best performance:
●
Position the antenna at right angles to the mounting
surface whenever possible.
●
Place the antenna above a desk rather than below.
isa-src.bk : isa-ch2.frm Page 5 Monday, October 14, 1996 1:23 PM
