The 8400-Series Voice Terminals Instructions for Installation, Switch,
Administration, and Programming the Options
555-015-725
Issue 1
October 1996
Programming the Options
Page 7-4
7
Enabling/Disabling the Mute Function
To enable or disable the Mute function:
1. While on-hook, press
or
.
■
The light next to
or
goes on.
2. Press .
■
The light next to
or
goes off.
3. Enter the 2-digit code, “68” (“MU”).
■
The red light next to
flutters.
■
The current setting (ENABLE MUTE BUTTON or DISABLE MUTE
BUTTON) is shown on the display, if there is one.
4. Press either “1” or “2” to change the setting:
— Press “1” to enable the Mute function
— Press “2” to disable the Mute function
or if the voice terminal has a display, press
to change the
setting. Press
to save the desired option and then exit
programming.
■
After pressing “1” or “2” or pressing “#”, one of the following
voice terminal responses occurs:
If the voice terminal saves your selection, the first three green
call appearance lights go on and, if you have a display, a
confirmation message is displayed.
If the voice terminal cannot save this selection, the first three
red call appearance lights go on and, if you have a display, an
error message is displayed. In this case, the selected option
will be in effect until power is removed from the set. If this
happens, try repeating the process. If the option still cannot
be saved, the terminal may be faulty.
Feature
Shift
Feature
Shift
Mute
Feature
Shift
Mute
*
#
