7-16
Stinger®
Administration Guide
Administering the SNMP Agent
Securing the SNMP agent
For example, to specify a view for read access for a group called
groupSF
with
SNMPv3 USM authentication, and privacy enabled, enter the following commands:
admin>
new vacm-access
VACM-ACCESS/{ "" "" v1 no+ } read
admin>
list
[in VACM-ACCESS/{ "" "" v1 no+ } (new)]
access-properties* = { "" "" v1 no+ }
active = no
match-method = exact-match
read-view-name = ""
write-view-name = ""
notify-view-name = ""
admin>
set active = yes
admin>
set read-view-name = view1
admin>
list access-properties
[in VACM-ACCESS/{ "" "" v1 no+ }:access-properties (new) (changed)]
group-name = ""
context-prefix = ""
security-model = v1
security-level = none
admin>
set group-name = groupSF
admin>
set security-model = v3-usm
admin>
set security-level = auth-priv
admin>
write
VACM-ACCESS/{ groupSF "" v3-usm auth-priv } written Defining views
Defining views
To define a view, set parameters in the
vacm-view-tree
profile. Following is a listing
of the profile’s default values:
[in VACM-VIEW-TREE/{ "" "" }]
tree-properties* = { "" "" }
active = no
tree-mask = ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff
tree-type = included
view-name = ""
view-tree-oid = ""
access-
properties:
security-level
Security level:
none
(the default)—No authentication and no privacy.
auth-priv
—Authentication and privacy.
auth-nopriv
—Authentication and no privacy.
Parameter
Setting
Summary of Contents for Stinger
