Lucent Technologies Stinger, Administration Manual

Page: 126 / 374

5-8 Stinger® Administration Guide
Monitoring Interfaces on LIMs and Trunk Modules
Displaying interface information
Line { 1 18 4 } (Down Idle DOWN DOWN 00854)
Line { 1 18 5 } (Down Idle DOWN DOWN 00855)
Line { 1 18 6 } (Down Idle DOWN DOWN 00856)
Disabled E3 ATM trunks:
E3 Lines (dvOp dvUpSt dvRq sAdm nailg)
Disabled OC12 lines:
(dvOp dvUpSt dvRq sAdm nailg)
To display all trunk ports that are in use, enter the command with the -u option:
admin> atmtrunks -u
In-Use OC3 ATM trunks:
OC3 Lines (dvOp dvUpSt dvRq sAdm nailg)
Line { 1 17 1 } (Up Assign UP UP 00801)
Line { 1 17 2 } (Up Assign UP UP 00802)
Line { 1 18 1 } (Up Assign UP UP 00851)
In-Use DS3 ATM trunks:
DS3 Lines (dvOp dvUpSt dvRq sAdm nailg)
In-Use E3 ATM trunks:
E3 Lines (dvOp dvUpSt dvRq sAdm nailg)
In-Use OC12 lines:
(dvOp dvUpSt dvRq sAdm nailg)
Resetting trunk statistics
To reset the trunk statistics for OC3-ATM and DS3-ATM trunk modules, use the -c
option. The following example clears trunk statistics for all trunks:
admin> atmtrunks -c
Clearing ATM Trunk Statistics for All Trunks
The following example clears trunk statistics for a specific slot:
admin> atmtrunks -c 17
Clearing ATM Trunk Statistics for Slot 17
Displaying LIM interfaces
Following are sample commands that display information about interfaces of
different LIMs.
Displaying ADSL LIM interfaces
The following sample
dmtaldsllines
commands shows information about the ADSL
interfaces of a Stinger unit with a 48-port ADSL LIM in slot 3 and slot 11, and a 24-
port ADSL LIM in slot 5.
The
dmtaldsllines -a
command displays the status and nailed group information for
all ADSL ports in the Stinger unit. The output of the following command is
abbreviated.
admin> dmtaldsllines -a