1-10
The Stinger® Compact Remote ATM DSLAM Getting Started Guide
Introduction to the Stinger Compact Remote ATM DSLAM
Host hardware
Figure 1-5. OLIMs installed in a Stinger FS+ host
When an OLIM is installed in the host Stinger unit, you can create profiles that are
associated with the Compact Remote ATM DSLAM units that are connected to it.
These profiles in the management interface of the host unit, allow the Stinger CR
ATM DSLAM units and the Stinger host to be managed through the same interface.
See Chapter 5 for detailed information about these profiles and the configuration of a
hosted Stinger CR ATM DSLAM.
The type of optical network created by hosted Stinger Compact Remote ATM DSLAM
units is illustrated in Figure 1-6.
STINGER FS
+
FAULT
FAC 1
FAC 6
FAC 5
FAC 4
FAC 3
FAC 2
PORT 1
PORT 6
FAULT
FAC 1
FAC 6
FAC 5
FAC 4
FAC 3
FAC 2
PORT 1
PORT 6
OLIM
OLIM