Lucent Technologies STGR-LIM-VD-24, Manual, Page: 83 / 102

VDSL Ethernet QOS VDSL Ethernet connections
............................................................................................................................................................................................................................................................
363-217-032R9.9.0
Issue 2, March 2006
5 - 5
............................................................................................................................................................................................................................................................
VDSL Ethernet QOS
Introduction
The quality of service settings for VDSL encapsulated Ethernet connections are
configured in a
ether-qos
profile that is identified by a contract name.
VDSL-Config contents
The following listing illustrates the default settings in a new
ether-qos
profile.
[in ETHER-QOS/"" (new)]
contract-name* = ""
priority = 0
committed-information-rate = 0
Parameter Setting
contract-name
A text field of up to 31 characters that defines the name for this
quality of service contract
priority
The priority of this contract
This is a numeric field with valid values from 0 to 3. Zero (0)
represents the lowest priority.
committed-
information-rate
The bandwidth, in kbps, allocated to a connection using this contract.
This is a numeric field with valid values from 0 to 1000000. A setting
of zero (0) will result in use of the full bandwidth of the connection.