Privacy (F07)
Description
This feature is available only on system phones.
This feature lets system phone users press a programmed button to turn Privacy
on and off, preventing or allowing other users to join calls at the user’s extension
as needed.
Related Procedures
Automatic Extension Privacy (#304)
is Assigned for an extension, that
extension normally is private. However, if a user sometimes needs to have
co-workers join conversations, the user can program a Privacy button to turn
Privacy on and off as needed. Once a Privacy button is programmed, the
user
must use the button to turn Privacy on and off even though Automatic
Extension Privacy (#304) is Assigned. Automatic Extension Privacy (#304)
is appropriate for use with standard phones.
Privacy applies to active calls—any user can retrieve a held call unless the
call is placed on hold with
, you can use Privacy at your extension to prevent other
users from joining your call and from accessing the Caller ID information
displayed for active calls at your extension.
Considerations
Privacy must be programmed on a button with lights. (Users cannot dial the
Privacy code manually, or use a programmed button without lights, to
activate this feature.) When Privacy is on, the button light at the extension is
also on, indicating that others
cannot join calls.
Privacy can be turned on and off at any time, even during a call.
Programming
(See Figure 2-3 in Chapter 2 for the location of special programming buttons
such as
s
and
e
on system phones.)
To program a Privacy button:
1.
Press
f
0
0
s
s
c
at extension 10
or 11.
2.
Dial the number of the extension to be programmed with this feature.
3.
Press a programmable button with lights.
4.
Press
f
0
7
.
5.
Program another button for this extension or exit programming mode.
Using
From a system phone, press the programmed button to turn Privacy on; press it
again to turn it off.
Use the button like a switch—when the light is on, Privacy is
on.
Privacy (F07)
5-145
Summary of Contents for PARTNER Advanced Communications System Release 1.0
Page 6: ...iv...
