Programming
(See Figure 2-3 in Chapter 2 for the location of special programming buttons
such as
s
and
e
on system phones.)
To restrict an extension from making calls on a specific line:
1.
Press
f
0
0
s
s
#
3
0
2
at extension 10
or 11.
2.
At the
Extension:
prompt, enter the extension number to be programmed.
For example, to program extension 23, press
2
3
.
3.
At the
Line:
prompt, enter the line number to be restricted at this extension.
For example, to restrict line 2, press
0
2
.
The current restriction displays.
4.
To change the line restriction for this extension, press
D
until the
appropriate value displays—see “Valid Entries” on the previous page.
5.
At this point:
To restrict another line at this extension, press
n
or
p
until
the line number shows on the display. Repeat Step 4.
To restrict another extension, press
N
P
and
begin at Step 2.
6.
Select another procedure or exit programming mode.
Line Access Restriction (#302)
5-109
Summary of Contents for PARTNER Advanced Communications System Release 1.0
Page 6: ...iv...
