Programming
(See Figure 2-3 in Chapter 2 for the location of special programming buttons
such as
s
and
e
on system phones.)
To identify a hotline extension and its alert extension:
1.
Press
f
0
0
s
s
#
6
0
3
at extension 10
or 11
.
2.
At the
Extension:
prompt, enter the hotline extension number—see “Valid
Entries” on the previous page. For example, to program extension 33 as
the hotline, press
3
3
.
3.
At the
Data
- - - - - - - - - - - -
prompt, enter the alert extension number—see
“Valid Entries” on the previous page. For example, to program extension
32 as the alert extension, press
3
2
. A display similar to the following
appears:
Internal Hotline Ext 33
Data 32
4.
At this point:
To change the hotline and alert extension numbers you just entered,
repeat Steps 2 and 3.
To delete the existing hotline and alert extension numbers, press
r
.
To identify another hotline and alert extension pair, press
n
or
p
until the new hotline extension number shows on the display.
Then repeat Step 3.
5.
Select another procedure or exit programming mode.
Using
To use the hotline phone:
1.
Lift the handset of the hotline phone.
The designated alert extension rings.
2.
When the call is answered, speak into the handset.
5-100
Hotline (#603)
Summary of Contents for PARTNER Advanced Communications System Release 1.0
Page 6: ...iv...
