Wildcard Characters.
You can use wildcard characters in list entries.
For example, your company’s Sales Department has a three digit account
code—the first digit represents the department and the second and third
digits represent the individuals in the department. You enter 4!! as the
list entry.
—
The following entries are valid:
401
410
499
455555
—
The following entries are invalid:
4
44
Programming
(See Figure 2-3 in Chapter 2 for the location of special programming buttons
such as
s
and
e
on system phones.)
To create a Forced Account Code List:
1.
Press
f
0
0
s
s
#
4
0
9
at extension 10
or 11.
2.
Select a list entry (01–99). For example, to select the third entry, press
0
3
.
A display similar to the following appears:
Forced Act Code List 03
Data
- - - - - - - - - - - -
3.
Enter up to six digits for the list entry.
4.
If the account code is five digits or less,
you must press
e
to save the
account code in memory.
5.
At this point:
To enter other account codes, press
n
to select a different list
entry and repeat Steps 3 and 4.
To change the account code you just entered, press
r
and repeat
Steps 3 and 4.
To delete the account code you just entered, press
r
.
6.
Select another procedure or exit programming mode.
5-84
Forced Account Code List (#409)
Summary of Contents for PARTNER Advanced Communications System Release 1.0
Page 6: ...iv...
