Disallowed List Assignments (#405)
Description
This System Programming procedure lets you assign up to eight Disallowed
Phone Number Lists to specified extensions.
Related Features
Disallowed Phone Number Lists (#404)
disallowed telephone numbers
before you use this procedure.
Considerations
When a Disallowed Phone Number List is assigned to an extension, the list
applies to
all lines to which the extension has access.
Valid Entries
1 = Assigned to extension
2 = Not Assigned to extension
✔
Programming
(See Figure 2-3 in Chapter 2 for the location of special programming buttons
such as
s
and
e
on system phones.)
To assign Disallowed Phone Number Lists to an extension:
1.
Press
f
0
0
s
s
#
4
0
5
at extension 10
or 11.
2.
Enter the number of the extension to be programmed. For example, to
program extension 27, press
2
7
. A display similar to the following
appears:
Disallow To 27
List Number:
3.
Enter the list number (1–8). For example, to select list 1, press
1
.
4.
To assign or unassign the list, press
D
until the appropriate value
displays.
5.
At this point:
To assign or unassign another list for this extension, press
n
or
p
until the list number shows on the display. Then repeat Step 4.
To program another extension, press
N
P
and
begin at Step 2.
6.
Select another procedure or exit programming mode.
5-60
Disallowed List Assignments (#405)
Summary of Contents for PARTNER Advanced Communications System Release 1.0
Page 6: ...iv...
