Caller ID information is displayed if you
a call; however, you cannot join
a call at any extension that has Privacy activated.
Caller ID information is displayed if users pick up calls with
but the restrictions
stated previously apply.
For incoming calls, Caller ID information displays only when a call is audibly
alerting at an extension. This means that extensions with
activated or extensions that have lines with
set to No Ring do
not receive Caller ID information. However, Caller ID information is
displayed once the call is answered or if the line is preselected.
can be set to either USA or Singapore. For proper
operation in the United States, leave the default setting, USA.
Considerations
Subscriptions to Caller ID service are on a per-line basis.
The lines associated with Caller ID must be connected to a line jack on a
PARTNER ACS processor module, 206EC module, or 400EC module. For
more information, refer to the
PARTNER Advanced Communications System
Installation guide.
Caller ID information is passed to an extension between the first and second
ring. To receive Caller ID information, wait until the second ring before
answering the call.
Individuals with Call Waiting from the local telephone company will not
receive Caller ID information for the second call.
Not all calls on Caller ID lines are displayed. This varies by local phone
company. When Caller ID information is not captured, the system date and
day (default) displays instead.
The incoming telephone number replaces the system date and time display
on system phones for the duration of the call. An out-of-area message
(
- - - - - - - - - - - - )
displays if a call is being dialed from a region that does
not support Caller ID. A privacy message (
Priv.
) displays if the caller has
blocked transmission of Caller ID information.
If you use SMDR, telephone numbers of incoming calls print on call reports
after the call is completed. (Private and out-of-area numbers are reported
as “IN” on call reports.)
5-40
Caller ID
Summary of Contents for PARTNER Advanced Communications System Release 1.0
Page 6: ...iv...
