Lucent Technologies PARTNER Advanced Communications System Release 1.0 Programming And Use Instructions Download Page 122 | Manualshive

Page: 122 / 365

background image

Backup Programming—Manual (#124)

Description

The backup of system and telephone programming is optional, but
recommended, especially if you are changing the processor module or
upgrading the system, or before and after any major programming changes.
This System Programming procedure manually backs up all the programming
(except the system date, day, and time) to a Backup/Restore PC Card.

Related Features

Verify that the

System Date (#101)

System Day (#102)

System Time

are set correctly. These settings are not backed up.

You can use

Backup Programming—Automatic (#123)

if you prefer. If so,

backups are done automatically at 2:00 a.m. on the first day of each month.
You can also use both methods, performing manual backups between the
scheduled monthly backups.

Once the system and telephone programming settings have been backed
up to a PC Card, you can use the

Restore Programming (#125)

procedure

to restore the settings if they become corrupted. You can also use Restore
Programming (#125) to verify the date on a backup file.

Considerations

To perform either manual or automatic backups, purchase a
Backup/Restore PC Card from Lucent Technologies.

Before inserting the Backup/Restore PC Card in PC Card Slot 2, power
down the system. After inserting the PC Card, power up the system again.
For instructions, see “Inserting or Removing a PC Card” in this section.

You

must have a Backup/Restore PC Card in the PC Card slot before a

backup can take place. It is recommended that you leave the
Backup/Restore PC Card in PC Card Slot 2.

Slot 2 is recommended for the Backup/Restore PC Card; however, either
slot can be used. If the system detects Backup/Restore PC Cards in

both

slots when a backup begins,

the first slot is used and the second is ignored.

The same Backup/Restore PC Card can be used for both automatic and
manual backups, since the data is recorded in two separate files. An
automatic backup replaces the AUTO.

mmddyy file only (where mmddyy

represents the date of the backup in month, day, year format)

, and a manual

backup replaces the MAN

.mmddyy file only.

Restore Programming (#125)

asks you to specify which backup file you want to use.

To save your previous system and telephone programming settings as well
as the current ones, use another Backup/Restore PC Card for the second
backup. By alternating the cards, you can keep the most recent two
backups.

Remember to power down the system before removing or

inserting the Backup/Restore PC Card.

Calls will continue to be handled normally during a manual backup.

Backup Programming—Manual (#124)

5-29

«
...
120
121
122
123
124
...
»

Summary of Contents for PARTNER Advanced Communications System Release 1.0














































































































































































































































































































































































Reviews:

No comments

Related manuals for PARTNER Advanced Communications System Release 1.0

ConferenceSHOT AV

Brand: VADDIO Pages: 114

Brand: Panasonic Pages: 16

Brand: Fender Pages: 6

STAGE-4 ROKKER XXR Custom

Brand: J&M Corporation Pages: 5

SoundPoint IP 320

Brand: Polycom Pages: 2

SCOPIA XT MCU series

Brand: RADVision Pages: 43

Brand: Fender Pages: 51

Satmix 2.1 PA system

Brand: Fun Generation Pages: 32

Brand: Roadstar Pages: 21

Brand: EMX Industries, Inc. Pages: 19

Brand: Curtis Pages: 7

Brand: Pioneer Pages: 6

Brand: Pioneer Pages: 2

Brand: Pioneer Pages: 35

Brand: Pioneer Pages: 15

Brand: Pioneer Pages: 34

Brand: Pioneer Pages: 44

Brand: Pioneer Pages: 40

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands