Programming
(See Figure 2-3 in Chapter 2 for the location of special programming buttons
such as
s
and
e
on system phones.)
To change the Automatic VMS Cover setting for an extension:
1.
Press
f
0
0
s
s
#
3
1
0
at extension 10
or 11.
2.
Enter the number of the extension to be covered by the voice messaging
system. For example, to program extension 11, press
1
1
.
3.
To assign or unassign Automatic VMS Cover, press
D
until the
appropriate value displays.
4.
To program another extension, press
n
or
p
until the extension
number shows on the display. Then repeat Step 3.
5.
Select another procedure or exit programming mode.
Automatic VMS Cover (#310)
5-23
Summary of Contents for PARTNER Advanced Communications System Release 1.0
Page 6: ...iv...
