Chapter 3 Configuring Ports and Channels Using the Console
Obtaining General Module Data and Accessing Ports and Channels
3-2
255-700-585
PacketStar
®
PSAX 3-Port DS3/E3 ATM Protection Module User Guide
, Issue 1
Release 10.0.0
Begin
1
On the Console Interface Main Menu window, select the Equipment
Configuration
option.
The Equipment Configuration window is displayed (see Figure 3-1
through Figure 3-5).
2
View the operational and alarm status, software version, PEC, and serial
number data of the installed modules.
3
When you are ready to begin configuring the ports and channels of the
module, select the line displaying the name of the module you want to
configure.
4
Proceed to the section, “Configuring the Ports,” for module configuration
procedures.
Note:
The sample Equipment Configuration windows in the following
figures may not show the actual module you are configuring.
These figures illustrate the variations of slot configurations for
the different PSAX chassis displayed on the Equipment Configu-
ration window.
End
Figure 3-1. Sample Equipment Configuration Window on a PSAX 1000
System (Page 1)
