255-700-467
5-3
PacketStar
®
PSAX 4-Port Voice 2-Wire Office Module User Guide
, Issue 1
Release 9.0.0
Chapter 5 Configuring Ports and Channels Using the AQueView EMS
Configuring the Module
Configuring the Module
To configure the ports of a 4-Port Voice 2-Wire Office module, perform the
steps in the following procedure.
Begin
1
Do one of the following to open the Port and Channel Configuration
window:
•
In the Front Panel, double-click the port to be viewed or configured.
•
In the Front Panel, right-click the port and a menu appears. Select
Configure.
•
In the Device Tree, double-click the desired port symbol or identifier.
•
In the Device Tree, select a port, then right-click the icon for the mod-
ule within Device Tree and a menu appears. Select Configure.
2
In the Port Configuration window, select the appropriate settings shown
in Table 5-2.
Figure 5-3. Device Tree and Device Window (Displaying a Typical Setup)