255-700-467
3-13
PacketStar
®
PSAX 4-Port Voice 2-Wire Office Module User Guide
, Issue 1
Release 9.0.0
Chapter 3 Configuring Ports and Channels Using the Console Interface
Saving the Equipment Configuration and Logging Off
5
To apply the values for the fields on this window, select the
Apply Port
and Channel Configuration
command and press Enter.
6
Select the
Configure Interface
command and press Enter.
The Circuit Emulation Interface Configuration window is displayed.
Note:
For information on configuring the Circuit Emulation interface
using the AC console, see chapter 5.
7
Repeat this procedure for the remainder of the ports, as needed.
Note:
Whenever needed, use the commands in the Two Wire Office Con-
figuration window (see Figure 3-8 on page 3-9) and on the Two
Wire Office Port and Channel Configuration window (see
Figure 3-9 on page 3-11) to manage the interfaces.
End
Saving the Equipment Configuration and Logging Off
After configuring the module ports and channels, the interface types for each
port and channel, and the connections, you must save the values to the
PSAX system database. It is recommended that you save your values fre-
quently as you progress through your work, at a minimum, after finishing
each stage of work:
•
Configuring each module in your system
•
Configuring the connections in your system
[Silence Suppres-
sion]
Default: Pvc
Range: N/A
Format: Predefined
Permanent virtual circuit (PVC).
[Echo Cancellation] Default: Disabled
Range: N/A
Format: Predefined
Silence suppression is disabled.
[Voice Compres-
sion]
Disabled
The echo cancellation function is disabled. This
function is a method for isolating and filtering
unwanted signal energy caused by echoes from
the main transmitted signal.
[Companding Law] Disabled
Voice compression is disabled.
[AAL Encapsula-
tion]
MuLawPCM
The PCM coding and companding standard used
in North America and Japan.
[Silence Suppres-
sion]
Aal1
ATM Adaptation Layer 1 (AAL1)
[Service Type]
Fxo
Foreign exchange office (FXO)
Table 3-6. Field Descriptions for the Two Wire Office Port and Channel Configuration Window
Field Name
Field Values
Description
