Chapter 1 Getting Started
General Document Navigational Guidelines
1-8
255-700-467
PacketStar
®
PSAX 4-Port Voice 2-Wire Office Module User Guide
, Issue 1
Release 9.0.0
•
To navigate through the Console windows, use the shortcuts listed in
Table 1-4.
On all the PSAX system windows, each command or menu option has an
underlined letter. The control key plus an underlined letter is a shortcut to
that command or menu option. You can use the navigation keys and hotkeys
with the Caps Lock key on or off. Always observe the status line at the bot-
tom of the window for instructions and information.
Selecting Menu Options and Fields in the AQueView GUI
Follow these guidelines to select a menu option or field in the AQueView GUI
windows and to navigate through the windows:
•
For AQueView procedures, instructions using the term “click” mean to press
the left mouse button, and instructions using the term “right-click” mean
to press the right mouse button. (If you have a mouse with three buttons,
you will not need to use the middle mouse button to do any functions with
the AQueView EMS.)
Table 1-3. System Responses to Selecting Options, Fields, or Commands
For a selected...
the following occurs:
option name
The window corresponding to the option name is displayed.
field
The following variations occur:
•
The field entry area is blank or contains the default or previously
entered value. Press Enter to enter or change data in this field. Press
Enter again to exit edit mode.
•
The field entry area, like the field name, is displayed in reverse video
image and contains a predefined set of values, which you can view or
select by pressing Enter to navigate forward through these values. To
navigate backward through these field values, press Ctrl+H or the
Backspace key.
Read-only fields, which you cannot change, are enclosed in square brack-
ets (example: [LineStatus]).
command
The following variations occur:
•
A message in the information line indicating an error or successful com-
pletion of the command is displayed.
•
The next higher level or previous window (
window name
) is displayed.
•
The next lower level or succeeding window (
window name
) is displayed.
Table 1-4. Shortcut Keys for Navigating Console Interface Windows
If you want to...
press...
redisplay the previous window
Ctrl+B on the window.
redisplay the Console Interface Main Menu window
Ctrl+G on the window.
refresh the window
Ctrl+R on the window.
