2-2
ORINOCO WavePOINT-II - Getting Started
Installing the WavePOINT-II AP - Introduction
Consult the “ORiNOCO Manager’s User’s Guide” for more information.
!
CAUTION:
Placement of the WavePOINT-II APs must satisfy the following
installation requirements:
a.
Connect the unit to a grounding type AC wall outlet (100-240
VAC) using the standard power cord as supplied with the unit.
b.
Placement must allow for easily disconnecting the access point
unit from the AC wall-outlet.
c.
Do not cover the unit, or block the airflow to the unit with any
other objects. Keep the unit away from excessive heat and
humidity and keep the unit free from vibration and dust.
d.
Installation must at all times conform to local regulations.
e.
When the WavePOINT-II AP unit will be connected to an
outdoor antenna system, consult the documentation that came
with the outdoor antenna kit for additional regulatory
information, safety instructions and installation requirements.
Indoor Antenna Placement
2
The integrated antennas of your ORiNOCO PC Card perform best in an
open environment with as few obstructions as possible. In most situations
mounting the access point as pictured in Figure 2-4 on page 2-10, will
provide satisfactory performance results. To ensure the best performance:
