............................................................................................................................................................
7
In the
Source/Destination Directory Path
field, enter
backups/<filename>
. (If the WaveStar
®
CIT is the FTP server, a
maximum of 80 characters is suggested for this field.)
You may also click the
Browse
button next to the Path: field to
browse to any directory on your PC and over-write the default entry.
The
Browse
button is not available (greyed out) if the FTP server is
not the local WaveStar
®
CIT.
Important! The value of the Path field can be either an absolute
path or a relative path that is relative to the FTP server root
directory. The absolute path must start with the drive name
followed by a colon (:) then the path names; for example:
C:\temp\today\backup. The syntax of the relative path must start
with the path name; for example: \temp\backup.
The WaveStar
®
CIT directory automatically enters the relative
path for the WaveStar
®
CIT. The default relative path is
C:/Program Files/Lucent Technologies/WaveStar CIT/
If you wish to store your data in a subdirectory, you may enter
backups/<subdirectory>/<filename>
if the subdirectory exists
before the command is sent. Directories will not be created by
this command, and therefore the command will be denied if any
directory in the path does not already exist.
............................................................................................................................................................
8
Click
OK
.
You will be asked to verify that you wish to backup to the directory
that you entered above. Click
Yes
if you entered the path correctly.
Result:
The Progress Indicator appears to indicate that the
backup is in progress. When the backup completes, a
WaveStar
®
CIT information screen appears that indicates
Remote Backup successful
. Click
OK
.
The backup file is now stored. If the WaveStar
®
CIT is your
FTP server and the default path and a subdirectory were used,
the file may be found at:
C:/Program Files/Lucent Technologies/WaveStar
CIT/backups/<subdirectory>/<filename>/
E
N D
O F
S
T E P S
..............................................................................................................................................................................
Procedure 6-9.1: Backup NE database via
FTTD
Supporting procedures
....................................................................................................................................................................................................................................
6 - 1 8 2
Lucent Technologies
365-372-333 R2.1
Issue 4, June 2005
