Enter a valid User ID and password in the WaveStar
®
CIT Login
window and click
OK
.
LUC01/LUC+01 and LUC02/LUC+02 are the default user
IDs/passwords for the WaveStar
®
CIT. It is highly recommended that
you change these user IDs and passwords during your first session to
preserve the security of your equipment. (To change your WaveStar
®
CIT password, select
Administration
→
Change Password
from the
WaveStar
®
CIT Network View.)
User IDs must adhere to the following guidelines:
•
User IDs must be one to ten alphanumeric characters in length.
•
User IDs are case sensitive.
Passwords must adhere to the following guidelines:
•
Passwords must be six to ten characters in length.
•
Passwords must begin with a letter.
•
Passwords must contain at least two non-alphabetic characters
(numbers or symbols). At least one of the non-alphabetic
characters must be a symbol.
Symbols may not include space ( ), commercial at (@), comma
(,), colon (:), equals sign (=), quotation mark (
″
), semicolon (;),
ampersand (&), horizontal bar (underscore) (_), question mark
(?).
•
Passwords are case sensitive.
Figure 6-2
WaveStar
®
CIT login window
Procedure 6-2: Connect personal computer
(PC) and establish WaveStar
®
CIT session
Supporting procedures
....................................................................................................................................................................................................................................
365-372-333 R2.1
Issue 4, June 2005
Lucent Technologies
6 - 2 7