Lucent Technologies MERLIN Plus Release 2, System Manual

Page: 81 / 337

CUSTOMIZED LINE On the Line Assignments form, the numbers 1 through 8 on the top row to the
ASSIGNMENTS right of the intercom numbers should show how you plan to customize the line
assignments to voice terminals.
Customizing a voice terminal’s line assignments is simply a matter of removing
and adding lines. But keep the following points in mind:
●
On every voice terminal (except a 5-button model), the button directly above
Conference is always the Intercom button. You can’t assign a line
or feature to it.
●
On every voice terminal (except a 5-button model), the button above
Transfer is always a programmable feature button. You can’t assign
a line to it.
●
When you assign lines to a voice terminal, the system assigns them to line
buttons in the order shown in Figure 3-8 below. This sequence is also the
voice terminal’s automatic line selection sequence—the order in which the
system selects lines for the voice terminal’s outgoing calls—unless you
program a different automatic line selection sequence.
●
On any voice terminal, line buttons without lines assigned to them can have
feature buttons programmed on them.
FIGURE 3-8 The order in which the system assigns lines to buttons.
❑ ❑
❑ ❑
4
8
❑ ❑
❑ ❑
3
7
❑ ❑
❑ ❑
2 6
❑ ❑
❑ ❑
1
5
❑ ❑
❑ ❑
Intercom
Conference Transfer
D r o p H o l d
Line Assignments for Voice Terminals
3-25