manualshive.com logo in svg

Lucent Technologies MERLIN Plus Release 2, System Manual

Introducing the Lucent Technologies MERLIN Plus Release 2, a comprehensive system designed to streamline your organization's communication needs. Access the user manual for this cutting-edge product and enhance your understanding of its features and functionalities through a free download available at manualshive.com. Optimize your business operations with ease.

Share
Download
background image

System Feature Report

NOTE:

(SFR)

This feature is used with a MERLIN Plus system data collector and an

AT&T 475/476 or 572/573 printer or equivalent.

DESCRIPTION

If the system administrator needs to verify the features administered to the
system or needs a written copy of the lines and features on each voice terminal,
he or she can use the data collector and the printer to print a System Feature
Report. This report lists both systemwide features and programmed features and
lines on individual voice terminals.

The system features that can be printed on the System Feature Report are:

●

Disallowed List assignments for each voice terminal.

●

Allowed List assignments for each voice terminal

●

Transfer Return Interval

●

Call Report settings, such as the minimum call duration of a call for which
the Call Report feature will print information

●

●

System Speed Dial numbers

Automatic System Access (ASA) administration

●

●

●

●

●

The voice terminal features that can be printed on the System Feature Report are:

The intercom number of the voice terminal

The voice terminal model type

Optional accessories used with the voice terminal

Voice Announcement Enable/Disable

Automatic Line Selection sequences

●

The lines and features assigned to all buttons on the voice terminal

Figure 5-3 shows a printout of a typical SFR.

CONSIDERATIONS

The System Feature Report feature can be accessed only from the

administrator/attendant console.

If the system administrator wants to have the date and time on the System

Feature Report, the administrator can set these options on the control unit when
he or she administers the date and time for the Call Report feature.
(See “Call Report.”)

The system administrator can connect the data collector and the printer to any
voice terminal jack in the system, except jack 10. However, if the printer and
data collector have already been assigned to a voice terminal jack for the
Call Report feature, usually jack 19, it is best to use the same jack assignment for
the System Feature Report.

5-142   MERLIN Plus System Features

Summary of Contents for MERLIN Plus Release 2


















































































































































































































































































































































Reviews:

No comments

Related manuals for MERLIN Plus Release 2

Eaton xStorage Home User Interface Manual preview
xStorage Home
Brand: Eaton Pages: 18
Eaton Cutler-Hammer IQ DP-4000 Installation, Operation And Maintenance Instructions preview
Cutler-Hammer IQ DP-4000
Brand: Eaton Pages: 87
micro-trak Calc-An-Acre II Reference Manual preview
Calc-An-Acre II
Brand: micro-trak Pages: 30
VADDIO PowerVIEW HD-30 Installation And User Manual preview
PowerVIEW HD-30
Brand: VADDIO Pages: 24
T-audio LX200T User Manual preview
LX200T
Brand: T-audio Pages: 2
CAME GGT40ACS Installation Manual preview
GGT40ACS
Brand: CAME Pages: 40
Denver CUT-301 Instruction Manual preview
CUT-301
Brand: Denver Pages: 12
L.J. Wing AireLogic User Manual preview
AireLogic
Brand: L.J. Wing Pages: 60
Hengbida Electronic Technology Sound Pad S1 Product Manual preview
Sound Pad S1
Brand: Hengbida Electronic Technology Pages: 19
Raven SCS 440 Installation Manual preview
SCS 440
Brand: Raven Pages: 10
Panasonic SB-EN7 Operating Instructions Manual preview
SB-EN7
Brand: Panasonic Pages: 8
Panasonic SAPM71 - MINI HES W/CD PLAYER (Spanish) Instrucciones De Funcionamiento preview
SAPM71 - MINI HES W/CD PLAYER
Brand: Panasonic Pages: 12
Panasonic SAPM31 - MINI HES W/CD PLAYER Operating Instructions Manual preview
SAPM31 - MINI HES W/CD PLAYER
Brand: Panasonic Pages: 16
Panasonic SB-AKX880 Operating Instructions Manual preview
SB-AKX880
Brand: Panasonic Pages: 20
Panasonic SAPM41 - MINI HES W/CD PLAYER Operating Instructions Manual preview
SAPM41 - MINI HES W/CD PLAYER
Brand: Panasonic Pages: 20
Panasonic SC-AK280 Operating Instructions Manual preview
SC-AK280
Brand: Panasonic Pages: 28
Panasonic SAPM321 - MINI HES W/CD PLAYER Operating Instructions Manual preview
SAPM321 - MINI HES W/CD PLAYER
Brand: Panasonic Pages: 24
Panasonic SC- AK42 Operating Instructions Manual preview
SC- AK42
Brand: Panasonic Pages: 32

Brands by name

Popular brands

Load more brands