Installation
2-2
Issue 1 January 1997
Checking the Equipment
Verify that the following equipment is in place and properly set up, as documented in its
installation manuals (see the Required Configuration table for equipment specifications).
Single-site
Multi-site
Processor
•
486 class / 25 MHz speed
•
8 Mb RAM
•
486 class / 66 MHz speed
•
8 Mb RAM
Storage
(1)
•
5 Mb for the application software
•
80 Mb for data (25,000 call records)
•
5 Mb for the application software
•
200 Mb for data (62,500 call records)
Serial Ports
(2)
and Modems
See Serial Port
Pinouts and
Modems in
appendix C.
•
A COM port available
(3)
for SMDR
input at all times
•
An additional COM port available
(3)
during Remote Access
•
A 9600-baud (or faster) modem for
Remote Access
(4)
•
A COM port available
(3)
for SMDR input at
all times
•
A 1200-baud (or faster) modem for
SMDR input
•
An additional COM port available
(3)
during
Remote Access
•
A 9600-baud (or faster) modem for
Remote Access
(4)
Devices
Bus, PS/2, or serial mouse (a serial mouse may cause IRQ conflicts. See
Appendix E for information on IRQ conflicts and solutions), VGA color monitor,
parallel printer
(5)
(must support graphics and 10-17 characters/inch)
Software
Windows 3.1 or Windows for Workgroups 3.11 or Windows 95 (if PC is on a
LAN, MERLIN LEGEND Reporter will require special installation.)
Graphics
Monitor
Parallel
Printer
Mouse
Remote
Access
Modem
MERLIN
LEGEND
Keyboard
Required
Configuration
