MERLIN LEGEND Communications System Release 7.0
System Programming
555-670-111
Issue 1
April 1999
Programming Procedures
3-568
Automatic Route Selection
3
Console Display/Instructions
Additional Information
PC
5.
Save your entry.
Select
Enter.
6.
Erase the current number of other digits (
n
).
7.
Enter up to 20 other digits (
n
= any combination of
0
to
9
).
Dial or type
[n].
Ã
8.
Continue to specify other digits for another route in the specified subpattern or go
to Step 9.
Select
Next.
Return to Step 6. The next route number
is displayed on Line 1.
9.
Save your entry.
Select
Enter.
10. Return to the System Programming menu.
Select
Exit
twice.
N11 Special Numbers Tables
3
Use this procedure to specify Facility Restriction Level (FRL) and/or digits that
must be added when emergency numbers in the N11 Special Numbers table are
dialed (for example,
411,
811,
or
911).
Subpattern B, absorb, and pool routing cannot be programmed for the N11
Special Numbers tables.
NOTE:
In Release 6.0 and later systems, when routing for ARS Special Numbers
N11 calls from a private network switch that is not connected to the public
switched network, the private trunks must be assigned to the main pool
ARS Table xx, Route x: >
xx
= table number entered in Step 4
Enter other digits
x
= route number entered in Step 4
n
Backspace
Next
Exit
Enter
Press Drop.
7%
+
I
