MERLIN LEGEND Communications System Release 7.0
System Programming
555-670-111
Issue 1
April 1999
Programming Procedures
3-454
Optional Group Calling Features
3
Console Display/Instructions
Additional Information
PC
7.
Erase the current external alert extension (
nnnn
) if assigned.
8.
Specify the extension (
nnnn
) for the alert.
If DSS is attached:
Toggle the red LED on or off as required.
Go to Step 9.
On = extension is assigned as alert
Off = extension is not assigned
If no DSS is attached:
SP: “Entering an Extension”
Ã
9.
Save your entry.
Select
Enter
or
Next.
Use
Next
to program the next calling
group. Return to Step 7.
10. Return to the System Programming menu.
Select
Exit
twice.
Group Type
3
Use this procedure to determine whether or not the system automatically logs in
members of a calling group after a power failure. This setting also determines the
type of voice messaging interface when the calling group is used to connect voice
messaging or automated attendant applications. The settings are listed below.
■
Automatic Log Out. Used for calling groups to specify that the system
does not automatically log in calling group members after a power failure.
Calling group members must manually log themselves into the group.
Group Calling xxxx:
xxxx
= number entered in Step 5
Enter external alert
extension
nnnn
Backspace
Next
Exit
Enter
Press Drop.
7%
+
I
