MERLIN LEGEND Communications System Release 7.0
System Programming
555-670-111
Issue 1
April 1999
Programming Procedures
3-410
Optional Group Features
3
Console/Display Instructions
Additional Information
PC
5.
Save your entry.
Select
Enter.
6.
Specify the extension.
7.
Assign or remove the extension from the paging group.
Select
Enter
or
Delete.
You may continue to assign or remove
extensions from the paging group by
repeating Steps 5 and 6.
8.
Continue to assign the extension to another paging group or go to Step 9.
Select
Next.
Return to Step 6 to continue
programming. The next paging group is
displayed on Line 1.
9.
Return to the System Programming menu.
Select
Exit
twice.
Group Coverage Member Assignments
3
Use this procedure to assign or remove an extension from a coverage group. A
coverage group is a group of senders. Coverage is an arrangement in which calls
from a group of senders are redirected to one or more receivers.
Group Page xxxx:
xxxx
= number entered in Step 4
Enter extensions
If no DSS is attached:
SP: “Entering an Extension”
Ã
Delete
Backspace
Next
If DSS is attached:
Exit
Enter
Toggle the red LED on or
off as required. Go to Step 9.
On = extension is included in paging group
Off = extension is not included in paging group