MERLIN LEGEND Communications System Release 7.0
System Programming
555-670-111
Issue 1
April 1999
Programming Procedures
3-365
Optional Extension Features
3
Console Display/Instructions
Additional Information
PC
7.
Save your entry.
Select
Enter
or
Next.
If you select
Next
to assign a display
preference to the next extension in a
sequence, repeat Step 5.
8.
Return to the System Programming menu.
Select
Exit
twice.
Service Observing
3
In Release 6.1 and later systems, use this procedure to configure up to 16 Service
Observing groups on a system. Each Service Observing group consists of one
Service Observer and a list of the stations (up to the system maximum of 200) that
the observer is allowed to monitor. A warning tone is programmed on a per group
basis to provide an audible indication that a station is being observed.
NOTE:
Service Observing may be subject to federal, state, or local laws, rules, or
regulations or require the consent of one or both of the call parties. You
must check in your jurisdiction and comply with all applicable laws, rules,
and regulations before using this feature. Failure to comply may result in
severe penalties.
Summary: Service Observing
3
Programmable by
System Manager
Mode
All
Idle Condition
Not required
Planning Form
4d, MLX Telephone
5b, Direct-Line Console (DLC): Digital
11, Service Observing: Group Assignment
Factory Setting
Warning: Yes
Valid Entries
Warning: Yes, No
Inspect
Yes
Copy Option
No