MERLIN LEGEND Communications System Release 7.0
System Programming
555-670-111
Issue 1
April 1999
Programming Procedures
3-350
Optional Extension Features
3
Console Display/Instructions
Additional Information
PC
7.
Enter the number of delay rings.
8.
Save your entry.
Select
Enter
or
Next.
If you select
Next
to assign a forwarding
delay to the next extension in a
sequence, repeat Steps 6 and 7.
9.
Return to the System Programming menu.
Select
Exit
twice.
Trunk-to-Trunk Transfer
3
Use this procedure to enable or disable trunk-to-trunk transfer at an extension.
When trunk-to-trunk transfer is disabled, users cannot transfer an outside call to
an outside line.
NOTE:
In Release 6.0 and later systems (Hybrid/PBX mode only), calls can be
transferred to members in the non-local dial plan tables, even if trunk-to-
trunk transfer is not allowed. This allows users of single-line telephones to
transfer incoming calls from the PSTN to non-local dial plan extensions.
Summary: Trunk-to-Trunk Transfer
3
Programmable by
System Manager
Mode
All
Idle Condition
Not required
Planning Form
4b, Analog Multiline Telephone
4d, MLX Telephone
4e, MFM Adjunct: MLX Telephone
Extension xxxx:
Enter Delay Rings (0–9)
Dial or type the number of delay rings:
Ã
x
You may use
Backspace
to delete
Backspace
Next
the last digit entered.
Exit
Enter
