Lucent Technologies MERLIN LEGEND Release 7.0, System Programming Manual, Page: 443 / 1082

MERLIN LEGEND Communications System Release 7.0
System Programming
555-670-111
Issue 1
April 1999
Programming Procedures
3-241 PRI Facilities
3
Special Services Tables
3
Eight tables provide for international calling and for operator-assisted calls.
Default tables include the special prefixes 0 and 00 for operator-assisted calls.
Dialed numbers are matched against entries in these tables for patterns (
011,
010, 01, 00, 0,
and
1
); for operator assistance (operator-assisted,
presubscribed common carrier operator, and none); and for type of number
(national or international). Up to four digits can be deleted.
Summary: Special Services Tables
3
Programmable by System Manager
Mode Key and Hybrid/PBX
Idle Condition Not required
Planning Form 3b, Incoming Trunks: DS1 Connectivity (100D module)
Factory Setting See Table 3-4
Valid Entries Prefix for international or operator-assisted calls
Inspect No
Copy Option No
Console Procedure To specify Pattern:
LinesTrunks
→
PRI
→
OutgoingTbl
→
SpecialServ
→
Pattern
→
Dial entry no.
→
Enter
→
Drop
→
Dial pattern
→
Enter
→
Exit
→
Exit
→
Exit
→
Exit
To specify Operator:
LinesTrunks
→
PRI
→
OutgoingTbl
→
SpecialServ
→
Operator
→
Dial entry no.
→
Enter
→
Select type of operator
→
Enter
→
Exit
→
Exit
→
Exit
→
Exit
To specify Type of Number:
LinesTrunks
→
PRI
→
OutgoingTbl
→
SpecialServ
→
TypeOfNumbr
→
Dial entry no.
→
Enter
→
Select type
→
Enter
→
Exit
→
Exit
→
Exit
→
Exit
To specify Delete Digits:
LinesTrunks
→
PRI
→
OutgoingTbl
→
SpecialServ
→
DeleteDigit
→
Dial entry no.
→
Enter
→
Drop
→
Dial pattern
→
Enter
→
Exit
→
Exit
→
Exit
→
Exit