Lucent Technologies MERLIN LEGEND Release 7.0, System Programming Manual

Page: 182 / 1082

MERLIN LEGEND Communications System Release 7.0
System Programming
555-670-111
Issue 1
April 1999
Programming with SPM
2-56 System Programming
2
Accessing System Programming
2
Follow the steps below to access system programming.
1. At the SPM Main Menu, press to select
Sys Program.
2. Press the function key next to the option you want.
3. If the option you want does not appear on the first screen of the System
Programming menu, press
%
to display the second screen of the menu.
Printing Reports
2
Use the following procedure to print system reports using SPM at the PC. The
SPM Print Opts must be set to PC Port. See
‘‘Print Options’’ on page 2-48
for details about setting the printer output port.
1. At the second page of the System Programming menu, press to select
Print.
SPM Main Menu
Menu: Select Function
Sys Program Maintenance
Backup Restore
Boards Pass-Thru
Print Opts Password
Monitor Language
System Programming: > System Programming: >
Make a selection Make a selection
System Extensions
%
Labeling Language
SysRenumber Options Data
Operator Tables Print
LinesTrunks AuxEquip Cntr-Prg
Exit NightSrvce Exit
System Programming: >
Make a selection
Labeling
Data
Print
Cntr-Prg
Exit