MERLIN LEGEND Communications System Release 7.0
System Programming
555-670-111
Issue 1
April 1999
Programming with SPM
2-47
Using SPM
2
Password
2
The Password option is used by qualified service personnel to change the modem
connection password. A password is always required to establish a connection
with the built-in modem. The password always consists of seven characters. You
can perform remote system programming only if you enter the password correctly.
A default password is set at the factory. You must obtain this password from your
system consultant (SC).
To change the modem connection password, follow the steps below:
1.
At the SPM Main Menu, press
to select
Password.
2.
Type the old (current) password. Do
not
press
1
.
If you type the old password incorrectly, the bottom of the screen displays the
message,
Not
Equal
. Repeat Step 2.
If you fail to enter the password correctly after three attempts, the bottom of the
screen displays the message
Old
Password
in
Use,
and the procedure
terminates. Press
1
to return to the SPM Main Menu.
SPM Main Menu
Menu: Select Function
Sys Program
Maintenance
Backup
Restore
Boards
Pass-Thru
Print Opts
Password
Monitor
Language
Password:
Enter Old Password
